ARC Welders

SALES PTY LTD

ARC WELDERS

Simple and rugged, AWE AC arc welders can get the job done. Available in single and dual phase up to 220 AMPS with step less amperage control, cooling fan and thermal overload protection. They are portable and designed to run most commercial electrodes . The ARC161T & ARC191T are supplied with accessories including electrode holder, earth lead, welding helmet and wire brush. Accessories for the ARC252T are sold separately. These units are suitable for D.I.Y. and light to medium fabrication . Built to European standards EN50063/ Pr EN50240/EN60974-1/EN50199

Specifications	ARC161T	ARC191T	ARC252T		MASTER 402T
Supply Voltage	240 Volt Single Phase	240 Volt Single Phase	240 Volt Single Phase		240 Volt Single Phase
		415 Volt Two Phase	415 Volt Two Phase		415 Volt Two Phase
Absorbed Power 60% KVA	3.2	4.0	8.4		10
No Load Voltage	48	48	50	68	52	70
Current Range + - 10%	50 ~ 130	35 ~ 170	50 ~ 220	45 ~ 180	55 ~ 270	50 ~ 250
Usable Electrode Size	1.6 ~ 3.2 mm	1.6 ~ 4.0 mm	1.6 ~ 5.0 mm		1.6 ~ 6.0 mm
Conventional Current - Amp	N/A	N/A	35% @ 211	35% @ 160	35% @ 250	35% @ 220
			60% @ 160	60% @ 120	60% @ 190	60% @ 170
Insulation Class	H	H	H		H
Protection Degree	IP21	IP21	IP21		IP21
Recommended Fuse Size	25 Amp	30 Amp ~ 240 Volt	50 Amp ~ 240 Volt		64 Amp ~ 240 Volt
		16 Amp ~ 415 Volt	25 Amp ~ 415 Volt		36 Amp ~ 415 Volt
Maximum Current Draw	28 Amp	35 Amp ~ 240 Volt	50 Amp ~ 240 Volt		37 Amp ~ 240 Volt
		19 Amp ~ 415 Volt	29 Amp ~ 415 Volt		21 Amp ~ 415 Volt
Dimensions ( L x W x H )	410 x 255 x 315	500 x 255 x 350	630 x 395 x 590		890 x 495 x 570
Weight ( Kg)	16	21.2	45		61.5

2 Berends Drive, Dandenong South, 3175

PH: 03 9761.4915 Email:sales@awesales.com.au